ROBOTERA opens orders for a 16-joint robot hand built around NVIDIA's DexUMI
ROBOTERA is selling its XHAND 1 Pro-U five-finger hand, limited to 40 units at first, after it appeared in an NVIDIA GR00T 2 demo at CoRL.

ROBOTERA has started taking commercial orders for the XHAND 1 Pro-U, a five-finger robot hand with 16 degrees of freedom. The first release is limited to 40 units. The hand appeared in a GR00T 2 demonstration shown by NVIDIA's Jim Fan at the Conference on Robot Learning, as reported by Humanoid Robotics Technology.
The hand was reshaped to match DexUMI, an exoskeleton from NVIDIA's GEAR Lab. Its joints correspond to those of the wearable, so a person's finger motions carry over to the robot with little conversion. The thumb position and the touch sensing on the palm side were also adjusted. A user wears the exoskeleton and handles real objects, while DexUMI records both finger movement and fingertip force. That data post-trains GR00T 2, and the skills then run on a dual-arm robot fitted with two of the hands. No operator has to remotely drive the robot during data collection.
Three multi-step tasks were tested. GR00T 2 succeeded 60% of the time at preparing banana yogurt, 80% at scooping granola, and 75% at a fire chemistry task with a match, a lamp and water.
Why it matters
Hands are often the weak point of humanoid robots, and collecting training data without teleoperation could make teaching them cheaper. The price of the hand has not been stated, and neither has the number of trials behind each success rate. Watch for whether outside labs publish results with the 40 units and whether production grows beyond them.