Sandia's six-inch robot is built to crawl through nuclear waste pipes
Sandia National Laboratories has built SPIINE, a robot two inches wide and six inches long, to inspect old waste pipes at the Hanford nuclear site from the inside. Lab tests went well. It has not yet been tested at Hanford itself.

Sandia National Laboratories has built a pipe-crawling robot called SPIINE to inspect waste pipes at the Hanford Site in Washington state, a former plutonium production complex now being cleaned up by the US Department of Energy. The pipes connect underground storage tanks holding radioactive waste. They are decades old, double-walled, run for hundreds of feet and can be as narrow as two inches. Earlier push cameras got only about 10 feet in and could not pass tight 90-degree bends.
SPIINE measures two inches by six inches. It has a flexible multi-axis body, adaptive wheels, steering and a high-resolution camera with adjustable LED lights, and operators drive it with a standard video game controller. Its motors can also pull a probe that measures pipe wall thickness. A single cable carries power and data, and several robots can be linked along that cable to share the pulling work around many bends. The project started more than two years ago, led by mechanical engineer Steve Buerger. Tests at Sandia were successful, according to the lab; a test at Hanford is the next step, and a way for the robot to clean its own camera lens is still in development.
Why it matters
Digging up contaminated pipes to look at them is not realistic, and nobody can check from the outside whether a pipe is corroding from the inside. A robot that can travel hundreds of feet through narrow pipes would give the cleanup teams their first proper look. For now this is a lab result: sludge, caked deposits and real pipe conditions at Hanford may still cause problems the tests did not show.